TONEWOODAMP logo
TONEWOODAMP logo

All collections

Output Jack (D.I.)



Doubling The ToneWoodAmp As A Multi-FX Processor
When you connect the ToneWoodAmp’s output jack to an amplifier or PA system, D.I. Blend automatically appears in the display.

To adjust the D.I. parameters:


1. Turn the Amplitude knob to adjust D.I. Blend. This controls the dry/wet mix sent to the output jack.

2. Click the Amplitude knob.

The D.I. Level option sets the overall output volume from the unit. Since the ToneWoodAmp has a relatively high output volume, be careful when adjusting this parameter.

3.
Click the Amplitude knob again to toggle the effect’s Gain or Gain and Volume depending on the D.I. Settings.

Was this article helpful?
Yes
No