FAQs
      Back to home
      1. ToneWoodAmp Support Center
      2. FAQs

      Is There an Output For an Amp? (D.I. MODE)

      ToneWoodAmp has a dedicated output jack to allow your TWA to double as a multi-effect processor while attached to the back of your guitar.
      Combo-clicking Parameters and Amplitude will take you to D.I. Mode, where you can turn the Parameters knob to choose either TWA and D.I.,  TWA or D.I., or Mute D.I.
      TWA and D.I. allow you to hear the TWA's effects through your guitar and the amplifier or PA that you're plugged into simultaneously.
      TWA or D.I. will mute the TWA's signal to your guitar, but the effects will continue to transmit to the external amplifier.
      Mute D.I. will mute the signal transmitted to your guitar and to the external amplifier. 

      Watch a demo of this feature here. 

      If you plan to use D.I. mode often, please remove the second protective liner from the suction rail on your ToneWoodAmp.

      NOTE: When using TWA in DI mode, especially in live situations, it is a good idea to secure the output cable running from the amp to your guitar strap. This will prevent the ToneWoodAmp from being pulled off of the back of your instrument.