Operation
      Back to home
      1. ToneWoodAmp Support Center
      2. Operation

      Output Jack (D.I.)

      Using your ToneWoodAmp with an Amplifier or PA System.



      Doubling The ToneWoodAmp As A Multi-FX Processor
      When you connect the ToneWoodAmp’s output jack to an amplifier or PA system, D.I. Blend automatically appears in the display.

      To adjust the D.I. parameters:

      1. Turn the Amplitude knob to adjust D.I. Blend. This controls the dry/wet mix sent to the output jack.

      2. Click the Amplitude knob.

      The D.I. Level option sets the overall output volume from the unit. Since the ToneWoodAmp has a relatively high output volume, be careful when adjusting this parameter.

      3.       Click the Amplitude knob again to toggle the effect’s Gain or Gain and Volume depending on the D.I. Settings.