Has anyone installed the x brace in the newYamaha A3 series?
I just purchased an A3M, and with the battery holder running right up the center of the body, there’s no way you can get the x brace low enough in the lower bout to hit the sweet spot of the guitar.
I love this guitar, and my trial run with the TWA taped in position sounded truly amazing.
Can someone offer some guidance or assistance ?
about 3 years ago
Do a bit of experimenting with placement. As long as the driver of the TWA is sitting near the middle of the lower bout, the TWA does not need to be on the centerline. There are no hard rules to placement, only suggestions!