Help

I recently purchased the tonewood amp for my Taylor 214ce acoustic/electric. I cant find out where to put the amp where it is flat because the back is curved. Any suggestions?

You'll want to install the TWA as close as possible to the edge of the guitar toward the endpin. We've had good luck mounting the X-Brace right up against the battery compartment/endpin jack.



Can I purchase the thin rubber contact pads that are on both edges of the ToneWood Amp

You can purchase replacement pads from the ToneWoodAmp website here: https://store.tonewoodamp.com/products/replacement-suction-pads-set-of-4


Login or Signup to post a comment