ToneWoodAmp Artist Jake Allen - Like and follow Jake Allen on Facebook!


How To Save And Load Effects


When you are satisfied with the effect’s parameter settings, you can save them as a preset. Each effect
has ten preset slots (a total of 80) in which you can Save, Load, or Delete.

Save

To save an effect:


1. Click and hold the Effects knob for two seconds.
    You will see Memory> on the display.

2. Turn the Effects knob clockwise until you see Save>.

3. Click the Effects knob again.
    You will see No on the display (as if asking “Are you sure?”).

4. Turn the knob clockwise until you see the Yes, and click to confirm save.

The Save function can overwrite existing presets. If a preset is already occupied with settings saved to
it, you will see Overwrite instead of Save followed by the number of the preset. To overwrite the preset
with your new settings, click the Effects knob, select Yes, and click the Effects knob to confirm the save.


Load


To load a saved effect preset:

1. 
Click and hold the Effects knob for two seconds.
    You will see Memory> on the display.

2. 
Turn the Effects knob clockwise until you see Load>.

3. 
Click the Effects knob again.

4. 
Turn the Effects knob to scroll to the desired preset.

5. 
Click the Effects knob again to confirm the load.

NOTE: When you change effect parameters, they are maintained until you turn off the unit. If you want
to use these changes next time, remember to save before shutting down.


Delete

To delete a saved effect preset:


1. Click and hold the Effects knob for two seconds.
    You will see Memory> on the display.

2. Turn the Effects knob clockwise until you see Delete>.

3. Turn the Effects knob to scroll through the 10 presets.

4. Select the desired preset and click the Effects knob again to confirm deletion.