How To Install The ToneWoodAmp With The B-KNG Bundles


(Install video made by Kremona Guitars).


ToneWoodAmp setup with the Kremona NG-1 (B-KNG bundle):

  1. For the Kremona NG-1 you will need to set the Master Gain and both Notch Filters. Save these settings in a new Guitar Settings “Mode” (on a different memory position such as Guitar 2, 3, 4 or 5).
    1. Watch this video about Guitar Settings “Mode” here
  2. Set the Master Gain to 15-20%.
    1. Watch this video about Adjusting the Master Gain
  3. Set the Notch Filters to:
    1. Watch this video first about Notch Filters adjustment here
    2. lowfilter: Frequency (“Parameters” knob) = 261hz*, Cut (“Effects” knob) = 20*.
    3. Highfilter: Frequency = 866hz*, Cut = 18*
    4. *estimated position only, values might vary between guitars