ToneWoodAmp2
      Back to home
      1. ToneWoodAmp Support Center
      2. ToneWoodAmp2

      5. The Lift Kit (It’s hard dude :)

      How to adjust the bottom of the ToneWoodAmp 2 to fit your guitar's back.

       

       

      To adjust the Lift Kit:

      1. Hold the ToneWoodAmp2 so that the bottom of the unit is facing up and the Lift Kit adjustable section of the bottom is away from you. 
      2. Hold the unit and place both thumbs against the edge of the suction pad.
      3. Press away from you with your thumbs. The Lift Kit will release. 
      4. Align the arrow on the edge of the lift kit with the notch that best suits the contour of your guitar's back. 
      5. Press the left kit back into place until you hear an audible click.

       

      If you have any questions, please contact us at support@tonewoodamp.com or (833)866-3111.